A-A-53508
Finish. The plugger shall have a mirror or bright finish. Serrated portions shall be free of barbs and shall provide adequate finger grip during use. The operative ends shall be smoothly finished including the flat face of the plugging operative end tip, and shall be free from grind marks, gouges, cracks, burrs, feathers or other irregularities. The faces of the plastic filling operative end shall be blended to form smoothly contoured surfaces. The operative end (plugging end) shall be uniformly and smoothly tapered.
Identification marking. Plugger shall be permanently and legibly marked as specified herein. All marking shall be on the smooth face and shall read in the direction from the plastic filling end to the plugging end. The plugger shall be marked with the identification designation “GLICK 1” on the plugging end portion of the handle. The word “stainless” shall be marked on instruments of foreign manufacture. As an alternate to the word “stainless”, the use of a registered tradename identifying the steel as stainless shall be acceptable, provided prior approval is received from the cognizant contracting officer.
Workmanship. The plugger shall be free from defects which either detract from its appearance or may impair its serviceability, proper functioning, or intended use.
Unit. Each (EA). One plugger, as specified, constitutes one unit.
Quality Assurance Provisions.
Responsibility for inspection. Unless otherwise specified in the contract or purchase order, the contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contact or purchase order, the contractor may use his own or any facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business