A-A-53475
Records. Records of examinations and tests performed by or for the contractor shall be maintained by the contractor and made available to the Government upon the Government’s request, at any time, or from time to time, during the performance of the contract and for a period of three years after delivery of the supplies to which such records relate.
Inspection. Inspection, as used herein, is defined as both examination (such as visual or auditory investigation without the use of special laboratory appliances or procedures) and testing (determination by technical means of physical and chemical properties) of the item.
Certificates of quality. Certificates of quality, supplied by the manufacturer of the component or materials, may be furnished in lieu of actual performance of such testing by the contractor, provided lot identity has been maintained and can be demonstrated to the Government.
Sampling.
For examination. Sampling for examination shall be conducted in accordance with MIL-STD-105, with an AQL of 1.0 and 2.5 (percent defective) and an inspection level of II. The unit of product for examination purposes shall be one sheet of platinum foil.
For tests. Sampling for tests shall be conducted in accordance with MIL-STD-105 at inspection level S-1. AQL shall be 1.0 for thickness and softness tests, but any failure shall be cause for rejection in the purity and weight tests. The unit of product shall be 20 units of issue (20 sheets of platinum foil) for the average weight test, 10 units of issue for thickness test, and 1 unit issue for the other tests. Where feasible, the same sample unit shall be used for the determination of two or more test characteristics.
Examination. The platinum foil shall be examined to determine compliance with specification requirements. Examination shall be conducted in accordance with the following classification of defects listed below. The foil shall be examined for defects including, but not limited to, those listed below.
Defects
Sheet of platinum foil has wrinkles.
Sheet of platinum foil has breaks or tears.
Length or width of sheet of platinum foil not as specified.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business