A-A-53388
The water proportioner shall be graduated to show the water levels necessary for use in either a “two-scoop system” (manufacturer’s impression describe a one-scoop impression, a two-scoop impression and a three-scoop impression). The powder and water proportioners shall be suitable for use in mixing the following types of impressions:
Two-scoop system
|
Powder |
Water |
Impression |
|
One-scoop |
Half measure |
Single partial lower or upper impression |
|
Two-scoop |
Full measure |
Full upper or lower impression |
Three-scoop system
|
Powder |
Water |
Impression |
|
One-scoop |
1/3 measure |
Single partial lower or upper impression |
|
Two-scoop |
2/3 measure |
Single full lower or medium upper impression |
|
Three-scoop |
Full measure |
Large full upper impression |
Amount of material in unit container. The volume of material in unit container, when mixed in the proportions recommended by the manufacturer and allowed to set in a suitable mass, shall be sufficient to make a minimum of thirty impressions of 46 ml each.
Instructions for use: In addition to the requirements specified in ADA Specification No. 18, instructions shall include:
(1) water temperature to be used to obtain a 73 degree Celsius (°C) mix temperature to compensate for ambient room temperatures of 18°, 23°, 24°, 27°, 30°, and 33°C, (2) method of conditioning the powder prior to scooping such as rotating or shaking the unit container and (3) method of preparing the patient’s mouth prior to introducing the impression material.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business