A-A-51289
Material. The headband, visor, and lens plate frames shall be fabricated from plastic materials suitable for the purposes intended. The knurled knob, pivot assemblies, finger snaps, and other hardware shall be fabricated from corrosion-resisting metals or metals treated for corrosion resistance. The lenses shall be fabricated from suitable optical glass. The comfort band shall be fabricated from suitable optical glass. The comfort band shall be fabricated from leather suitably surface treated and suitable for the purpose intended.
Suitable instructions on care and cleaning of loupes shall be included with each unit of issue.
Workmanship. The magnifier shall be free from defects which detract from its appearance or impair its serviceability.
Unit. Each (EA). One magnifier, as specified, constitutes one unit.
Quality Assurance Provisions.
Responsibility for inspection. Unless otherwise specified in the contract or purchase order, the contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contact or purchase order, the contractor may use his own or any facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements.
Records. Records of examinations and tests performed by or for the contractor shall be maintained by the contractor and made available to the Government upon the Government’s request, at any time, or from time to time, during the performance of the contract and for a period of three years after delivery of the supplies to which such records relate.
Inspection. Inspection, as used herein, is defined as both examination (such as visual or auditory investigation without the use of special laboratory appliances or procedures) and testing (determination by technical means of physical and chemical properties) of the item.
Sampling for inspection. Sampling for inspection shall be conducted in accordance with MIL-STD-105. Where feasible, the same sample shall be used for the determination of two or more inspection characteristics. The unit of product for inspection purposes shall be one magnifier. Unless otherwise specified, sampling for tests (when applicable) shall be conducted at inspection level S-1, AQL 1.0.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business