A-A-0051596 (DM)
Materials and dimensions. This item description shall be in accordance with GG-I-526, as specified herein.
Tip. The tip shall be fabricated of AISI type 420 stainless steel, as specified in GG-I-526.
Connecting body. Style I shall be fabricated of Monel 400; style II shall be fabricated of AISI 17-4 PH stainless steel, as specified in GG-I-526.
Nozzle. The nozzle shall be fabricated of polysultone.
Stack. The stack shall be fabricated of Permanickel Alloy 300 strip. One strip shall be 0.0095-0.0105 inch thick and 0.178-0.187 inch wide. The thickness of the stack shall be 0.159-0.168 inch thick.
Hardness. The operative tip shall have a Rockwell hardness of Rc 40 to 45.
Finish. The operative tips shall have a mirror or bright finish.
Workmanship. The nozzle shall show no evidence of cracking, holes, or pitting, stack shall be free from metal slivers and burrs which will detract from its appearance or impair its serviceability.
Identification. The inserts shall be identified with the name of the manufacturer.
Unit. Each (EA). One insert of one style only, as specified, constitutes one unit.
Quality Assurance Provisions.
Responsibility for inspection. Unless otherwise specified in the contract or purchase order, the contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contact or purchase order, the contractor may use his own or any facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business